STEP 1: PREPARING THE ROOM: MARKING SPOTS FOR THE PROFILE AND LIGHT FIXTURES

• Measure the level of the future ceiling, considering the height of the lighting fixtures. A construction or laser level will work, and you can also use a chalk line
• Mark the spots for the light fixtures

STEP 2: INSTALLING THE PROFILE AND MOUNTING BASES FOR LIGHT FIXTURES

• Cut the short side of the profile and install it along the perimeter of the room, starting from the corner
• Attach metal hangers to the light fixture platforms and secure them to the ceiling

STEP 3: STRETCHING THE FILM AND INSTALLING LIGHT FIXTURES

• Secure the film using a harpoon on each side at several points
• Stretch the film in sequence from the center to the corners, increasing the tension
• Trim the excess film and install a decorative insert around the perimeter
• Locate the spots for the platforms through the film and install the light fixtures